Outback Products Are Precision Designed And Manufactured In The USA ! 

Croc Tough TM

If It Isn't Croc Tough, You Had Better Bring A Spare !

THE OUTBACK SURVIVALIST SYSTEM

Perfect for Remote Homes, Larger Cabins, Telecommunication or Military Systems, Industrial or Commercial Systems, and many more extreme remote applications

Rock solid from the ground up, the Outback PATHMAKER system provides you with a foundation that you'll be able to build upon and rely upon for years to come.

THE INVERTER

At the heart of this system is the Outback Power FX series inverter. This modular "building block” sine wave inverter/charger is perfect for both small and large power systems.

Each OutBack FX pure sine wave inverter/charger is a complete power conversion system - DC to AC inverter, battery charger and AC transfer switch. Additional FX inverter/chargers can be connected at any time in either parallel (120 VAC), series (120/240 VAC), or three-phase (120Y208 VAC) configurations. This allows a system to be tailored to meet the specific power conversion requirements of the application, both at the time of the installation and in the future. The OutBack FX is designed to survive harsh environments anywhere in the world.

With it's unique, sealed, gasketed, die-cast aluminum casing, it's virtually impervious to the major causes of inverter failure. Contaminants such as moisture, dirt, insects and small animals which would spell death to an ordinary inverter, can't touch this beauty !

THE SOLAR MODULES

From the bitter cold of the South Pole to the searing heat of the Sahara Desert, the advanced technology that goes into each and every Mitsubishi solar module has proven itself in test after test for more than 25 years.

Utilizing the latest state of the art patented process for manufacturing multi-crystalline silicon Mitsubishi solar modules have achieved efficiencies once thought impossible. Mitsubishi's newly developed treatment method processes multi-crystalline silicon cells in order to produce a surface texture that minimizes surface reflectance and maximizes output, resulting in a maximized conversion efficiency.

Couple this panel's high efficiency with its voltage optimized output (24.2 Volts) for better performance in extreme environments and you've got one screaming panel that the competition just can't touch.

Each Mitsubishi solar module utilizes a sturdy anodized aluminum frame which has been assembled using stainless steel screws rather than flimsy rivets for a lifetime of rigorous use. Add to this the latest in solar module interconnection technology, blocking diodes and a 25 year warranty and there's no question as to why Mitsubishi solar modules are among the best selling, best performing, most reliable products on the market !

THE MOUNTING RACKS

Ask anyone in the industry, who makes the best mounting racks in the world, and you'll hear the name Unirac mentioned time after time.

SolarMount's third-generation extruded aluminum rail is the most versatile yet. Top down assembly is ideal for Plug and Play PV modules. An entire array can be assembled and wired where they're installed. The continuous, slotted rails provide the ultimate in adjustablility. No more re-drilling holes or repositioning footings.

Rated for 120 mile per hour winds, you can huff and puff, but you'll never blow these babies down !


THE CHARGE CONTROLLER  

What can we say ? The OutBack MX60 is the hottest selling MPPT (Multi Point Power Tracking) charge controller on the market, we can't keep enough of these on our shelves !

The OutBack MX60 Maximum Power Point Tracking (MPPT) charge controller enables your PV system to achieve its highest possible performance. Rated for up to 60 amps of DC output current, the OutBack MX60 can be used with battery systems from 12 to 60 VDC with PV open circuit voltage as high as 125 VDC. The MX60's set points are fully adjustable to allow use with virtually any battery type, chemistry and charging profile.

The OutBack MX60 allows you to use a higher output voltage PV array with a lower voltage battery - such as charging a 24 VDC battery with a 48 VDC PV array. This reduces wire size and power loss from the PV array to the battery/inverter location and can maximize the performance of your PV system.

The OutBack MX60 comes standard with an easy to use and understand display of the PV system’s performance. The four line, 80 character, backlit LCD display is also used for programming and monitoring of the system’s operation.

The OutBack MX60 can also be connected to the OutBack MATE system controller and display to allow monitoring of up to eight MX60 controllers from a distant location - up to 300 feet away. The MATE also includes an opto-isolated RS232 port for connection to a PC computer for data logging and system monitoring.

This System Includes All Of The Following Components:

Qty. 1 Your Choice: The OutBack FX2024T or the FX2548T sealed Inverter/Charger system with AC transfer switch, turbo option and LED status display. *

Qty. 8 Mitsubishi PV-MF165EB3 165 watt high efficiency solar panels.  

Qty. 2 pair of Unirac SMR168 SolarMount rails with L-brackets and hardware to attach brackets to rails.

Qty. 2 CT4C top mounting clamp set. Includes clamps and hardware to attach panels to rails.

Qty. 1 PS2 Mounting plate *

Qty. 1 PS2DC175 or PS2DC100 enclosure with DC breakers depending on which inverter is chosen.*

Qty. 1 PS2AC50D enclosure with AC breakers. *

Qty. 1 FXA FX accessory kit with DCC, DCA and ACA.

Qty. 1 pair of 5 foot 4/0 UL rated in inverter cables.

Qty. 1 Set of 4/0 cable for wiring Inverter breaker to inverter. *

Qty. 1 Outback Power MX-60 MPPT 60 Amp charge controller. 

Qty. 1 OutBack Power Mate system controller and display.

Qty. 1 Sunlight resistant solar module wiring with necessary MC connectors.

Qty. 4 OBDC-15 DC photovoltaic breaker 15 amps 125 VDC. *

Qty. 2 OBDC-40 40 Amp DC breakers for input and output of MX-60

Qty. 1 Set of crimp connector for wiring MX-60 to Battery

Qty. 1 Instruction set and wiring diagram.

Download The Mitsubishi Specsheet

Download The FX2024 Specsheet

Download The FX2548 Specsheet

Click Here For MX-60 Specsheet.

TEMPORARILY SOLD OUT !

With 5 to 6 hours of full sunshine per day, this solar array can pump approximately 189,600 to 227,520 watt hours of energy into your system's battery pack per month !

LIST PRICE $

$

Down Under Prices ^TM And Out Of This World Service & Support !

Return To Index